Model 6: Rancher 4×4 Wagon

950+
5
Model 6 v 1.1.2

Price:$40.00

One of our biggest models is here! Rancher 4×4 Wagon brings these features:

  • XXL size – 56 cm long!
  • you can select a wider wheel track (3 options)
  • realistic body details, embossed into the part surface

The model measures approximately 56 cm in length at a 1:8 scale and is ready to be outfitted with your own RC equipment. It is suitable for use both indoors and outdoors.

This set includes 3D printable parts for your 3D printer, however, non-printable components such as screws and electronics must be purchased separately. Links to purchase these parts are included in the Build Guide.

Read More
  • Printing time
    17 days
  • Bed size
    20x20x20 cm
  • Parts
    177 pcs
  • Model weight
    3 kg
  • Material
    PLA
  • Material
    PC Blend/ASA
  • Soldering
    yes
  • Glueing
    no glue

Model 6: Rancher 4×4 Wagon Accessories

New version 1. 6. 2022

Model 6 v 1.1.2

  • Update Print 19 - Interior 3 (Hardtop interior panels)

3D Sets BeltDrive 4x4

Durable, simple, and quiet - thanks to timing belts.

Opened Differentials

Can be combined with locked axles for optimal performance.

Easy repaired

You can print new parts and easy repaired.

Generation 2.0 Drivetrain

Product Details

 

Easy to Assemble

To build the model you only need some basic tools such as a screwdriver, a sharp knife, soldering iron and most importantly – a good mood.

Cheap and fast repairs

Did you break something? Don’t worry, you’ll have a reprinted spare part in no time. Then loosen a few screws and replace the damaged parts. And – drive again immediately!

3d print maximum, buy minimum

“Don’t buy parts – just print them, nearly all!” You print most parts starting with bodywork, complete chassis and even cardan joints and gearbox. Buy just motor, radio control electronics, tires and shocks/springs – and you are ready for ride.

Step-by-step User Guide

Comprehensive Build Guide is available for free to anyone – lets go through before you buy the model. Build Guide include a complete bill of materials and links for online stores, when you can purchase non-printable parts.

“Build when you print” – you get not only the ready-made print plates but also the time-effective print sequence, so you can continue assembling while you printing and do not need to wait for the part you need.

Build Guide available here
List of non-printable parts is here

What 3d print data I will get?

You don’t get the usual clutter of .stl parts, we prepared:

  • gcodes compatible with Original Prusa MK3 printers
  • printing assemblies in .3mf files (can be opened in Prusa Slicer, Cura, Simplify 3D)
  • standalone parts in .stl files

If you have Original Prusa MK3, you can print right from the gcodes, if you have another printer, just load .3mf files in slicing software and generate you own gcode. Or make put together parts you wish using common .stl files.

What you will need:

  • any 20 x 20 cm 3D printer, Prusa i3 recommended
  • 3,25 kg of filament needed to all parts, PLA or PET. Preferably 2,5 kg of black and 0,75 kg of any colour (body of the car).
  • bring your own motor/speed controller, servo and battery
  • basic soldering equipment
  • screws and nuts
  • set of bearings
  • set of rubber tires and shocks

Technical Specification

Dimension51.0 cm length, 24.5 cm width (including mirrors), 22.5 cm height
Filament weight3 kg
Model weight3,8 kg
File size465MB

Model 6: Rancher 4×4 Wagon – Changelog

New version 1. 6. 2022

Model 6 v 1.1.2

  • Update Print 19 - Interior 3 (Hardtop interior panels)
New version 11. 4. 2022

Model 6 v 1.1.1

  • BeltDrive - Box Front D - fix for missing Hinge Hole
New version 7. 4. 2022

Model 6 v1.1.0

  • New BeltDrive 4x4 - silent & reliable, because it uses timing belts. Designed for brushless motors only.
  • Front & Rear Axle - opened differential - now you can 3d print and build real differentials, which can be combined with locked axles too. You can make a specific setup that fits your needs.
  • New Cardan joints - snap-on design without tiny screws gives smooth operation and reliability.
  • 3-link suspension - allows better kinematics and smoother movements of the body.
New version 20. 10. 2020

Model 6 v1.0.3

  • Gearbox Housing update
New version 14. 10. 2020

Model 6 v1.0.2

  • error resolved in "Interior 1" (new seats) printing setups (.gcode, .3mf, printing plates in .stl format).

2 reviews for Model 6: Rancher 4×4 Wagon

Only logged in customers who have purchased this product may leave a review.

2 reviews for Model 6: Rancher 4×4 Wagon

  1. timjardan (verified owner)

    This is fantastic. Ordered my hardware from eBay and Amazon. Everyone I’ve shown it to has been impressed with the detail. Both my son and I thoroughly enjoy driving it. (Just might need to make another!)

    I printed this on a Prusa i3 Mk2s without too much trouble.

    I love that locked and unlocked diffs are included. I’m running front and rear unlocked and it drives well and goes through dirt, grass, and gravel without issue – and of course concrete and asphalt is no problem. I’ve rolled it over and had nothing break. Traversing larger rocks are a different story though. Granted, that’s to be expected as rock isn’t as forgiving.

    When doing an expedition over more difficult terrain, just bring some spare parts and a couple tools. Broken stuff swaps out quickly as it’s easily accessible.

    I live in the southwestern US where temps get hot. Today we had it out in the sun with a high temp of 104F (40C) and the back part of the roof warped (PLA). I have the front part printed in ASA now because of this. So, if you’re in a hotter climate, print with the appropriate materials. I’m replacing mine one part at a time now.

    One of the really great things about 3d printing in general (and it applies well here) is if something isn’t working well, you can reengineer the part and try again. Or, if you just want to try something different, you can. You’re not limited by what’s on the shelf at the store. If it works well, share the fix with others.

    Overall this thing has been a ton of fun printing, building, and driving.

  2. Scott Bradshaw (verified owner)

    I am printing my last plate as of writing this review and have most of the 4 door Rancher assembled with the exception of the top. I have been impressed with the design files and ready to print plates right from the beginning. I have been using the Prusa Slicer prepared plates but printing on my stock Creality Ender 3 Pro with esun PLA + filament and everything has turned out great and fitment of all the parts is right on. I can’t imagine how much time it took to design the model and all the components but it is well worth the money. I will be purchasing one of the Landy Models next! here’s to hoping they add a Vintage Ford Bronco look-a-like soon. Couple of things to keep in mind. ordering parts from Ali express will be the cheaper route but will most likely take longer to arrive. I ordered mine from amazon and picked up the hardware from a local hardware store as I didn’t want to wait. I also printed my gears with PLA + and put a fan on the motor to try and keep heat down. I haven’t had any problems with the PLA+ gears and have been driving it around 3/4 assembled for several days now with no gear failures. However I have broken two drive shafts but blame my print settings more than anything as they were 15% infilled on accident instead of solid. I would highly recommend solid infills for any of the drivetrain components. But again that is the beauty of this thing… a couple hours later I had some fresh driveshafts on my printer ready to be installed.

    Id give this thing 10 stars if I could I have had such a fun time printing, building and playing with it. and look forward to the next one, and hope that they have lots more models in the future.